Categories
Omnitron Electronics Toll Free:1-800-379-6664 Phone:954-574-0345 Fax: 954-574-9528
|
Product Details
View Larger Image |
OWON PDS5022S Oscilloscope
SKU: PDS5022S
|
Overview
Product Details
Low-cost portable dual channel oscilloscope with a large color display and battery supply. It’s a perfect instrument for educational purposes and service organizations.
Digital storage oscilloscope. Dual channels + external trigger. Bandwidth 25 MHz. Sample rate (Real time) 100MS/s. Record length 5K points on each channel. Cursor measurement. Automeasurement 20 types. Trigger type: Edge, Video. FFT. Peak detect and Average. Display: 7.8 '' color LCD, STN screen, 640×480 pixels. Dimensions: 14in × 6in × 4in / 356mm × 153mm × 102mm. Weight 3.7lb / 1.7kg. PDS5022S bench DSO has been designed as an entry level instrument for educational, hobby and budget-driven applications. Although low-cost, the PDS5022S is packed with a wide range of useful functions usually seen only on higher-end DSO's, such as video trigger and auto-measurement. The large full colour LCD display is made to show a clear unambiguous waveform.
Technical Specifications:
This instrument should run for more than 30 minutes continuously under the specified operating temperature.
If the change range of the operating temperature is up to or exceeds 41°F / 5°C, open the system function menu and execute the “Self-calibration” procedure.
All specification standards can be fulfilled, except one(s) marked with the word “Typical”.
Bandwidth
- 25MHz
Channel: 2 + 1 (External)
Acquisition:
Sample rate (real time)
- 100MS/s
Input:
- Input coupling: DC, AC , Ground
- Input impedance: 1M§Ù±2%, in parallel with20pF±5pF
- Probe attenuation factor: 1X, 10X, 100X, 1000X
- Max. input voltage: 300V (PK-PK) (DC + AC PK-PK)
Horizontal System:
- Sampling rate: 10S/s~100MS/s
- Interpolation: (sin x)/x
Record length: 5K points on each channel
Scanning speed: (S/div)
- 5ns/div~100s/div, step by 1~2.5~5
Sampling rate / relay time accuracy ±100ppm
- Interval (DT) accuracy (DC~100MHz)
- Single: ± (1 interval time+100ppm. reading+0.6ns); Average >16: ± (1 interval time +100ppm reading+0.4ns)
Vertical system:
- A/D converter: 8 bits resolution (2 Channels simultaneously)
- Sensitivity: 5mV/div~5V/div (at input)
- Displacement: ±10div(5mV/div~5V/div)
- Single bandwidth: Full bandwidth
- Low Frequency: ≥5Hz (at input, AC coupling, -3dB)
- Rise time (at input, Typical): ≤14ns
- DC accuracy: ±3%
- DC accuracy (average): The voltage difference (ΔV) between any two points on the wave form after averaging the captured wave forms of more than 16: ± (5% Reading + 0.05 divisions)
Trigger:
Type
- Edge Rising, Falling
- Video Line synchronization, Field synchronization, Odd field, Even field, Any line
Edge trigger
- Sensitivity Ajustable: 0.2div~1.0div
Coupling
DC, AC, LF Rjc, HF Rjc
Trigger level range
- Internal ±6 div from the screen center
- EXT ±600mV
- EXT/5 ±3V
Trigger level Accuracy (typical):
- Internal ±0.3div
- EXT ±(40mV + 6% of Set Value)
- EXT/5 ±(200mV +6% of Set Value)
Horizontal Trigger displacement
Pre-trigger: 655 div Post-trigger: 4 div
Trigger Hold off
Range 100ns~10s
50% level setting (typical): Input signal frequency ≥50Hz
Trigger sensitivity (Video trigger, typical)
- Internal Peak-peak value of 2div
- EXT 400mV
- EXT/5 2V
Signal system NTSC, PAL, SECAM (any frequency)
Alternate trigger
- CH1 trigger Edge, Video
- CH2 trigger Edge, Video
Measurement
- Cursor
DV and DT between cursors
- Automatic
Peak-to-peak value, average value, root mean square value, frequency, period, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot, RiseTime, Fall Time, +Width, -Width, +Duty, -Duty, Delay A B
- Waveform Math +, -, Invert, FFT
- Waveform storage 4 waveforms
Lissajou’s figure
- Bandwidth: Full bandwidth
- Phase difference: ±3°
Communication port: USB1.1 or RS-232
General Specifications:
Display
Model | PDS5022S | PDS062T, PDS7102T |
---|---|---|
Display Type | 7.8” color liquid crystal display | 8” color liquid crystal display |
Display Resolution | 640 (horizontal) × 480 (vertical) pixels | |
Display Color | 256 colors | 65536 colors, TFT screen |
Probe compensation
- Output voltage (typical): 5V, with the Peak-to-peak value ≥1MΩ
- Frequency (typical): 1KHz square wave
Power
- Supply 100-240 VACRMS, 50/60Hz, CAT II
- Consumption: <15W
- Fuse 1A, T class, 250V
- Battery Optional
Environment
- Temperature Working temperature: 32°F~104°F / 0°C~40°C
- Storage temperature: -4°F~+140°F / -20°C~+60°C
- Relative Humidity: ≤ 90%
- Height Operating: 2743.2yd / 2508.3m
- Non-operating: 16404yd / 5856m
- Cooling Method Natural convection
Mechanical Specifications
Model | PDS5022S |
---|---|
Weight | 3,7lb / 1.7kg |
Dimensions | 14in × 6in × 4in / 356mm × 153mm × 102mm |
Interval Period of calibration:
Perform self-calibration to verify that your instrument is operating properly. Self User’s calibration performs an internal self-alignment routine to optimize the signal path in the oscilloscope. The routine uses internally generated signals to optimize circuits that affect channel sensitivity, offset and trigger parameters. Let the instrument warm up for at least 30 minutes before performing self-calibration. You should perform self-calibration according to the following recommendations:
- Every 12 months or after 2000 hours of operation
- If the ambient temperature is > 50 °F from the calibration temperature
- If you want to maximize the measurement accuracy
- After experiencing abnormal operation
- To verify proper operation after repairing
Tell a Friend
Cart Contents
Order Info
INTERNATIONAL:954-574-0345
SCHOOL PURCHASE ORDERS:
FAX: 954-574-9528
INTERNATIONAL ORDERS:
MONEY ORDER,WESTERN UNION, OR BANK WIRE
(NOT INCL. CANADA)