Overview

The PCSU1000 digital storage oscilloscope uses the power of your PC to visualize electrical signals. Its high sensitive display resolution, down to 0.15mV, combined with a high bandwidth and a sampling frequency of up to 1GHz are giving this unit all the power you need. The USB connection makes this unit a snap to set-up, no external power required! In the field measurements using a lap-top computer have never been this easy. This scope comes in a stylish vertical space saving design.

Powerful software will fulfill all your needs, but for those who like a challenge; a DLL is supplied, which allows you to create your own application.

Product Details

Features

oscilloscope:
- time base: 20ns to 100ms per division
- trigger source: CH1, CH2, EXT or free run
- trigger edge: rising or falling
- trigger level: full-screen adjustable
- step interpolation: linear or smoothed
- markers for: voltage and frequency
- input range : 5mV to 2V/division
- input sensitivity: 0.15mV display resolution
- auto set-up function and X10 option
- pre-trigger function
- readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
- recording length: 4K samples / channel
- real time sampling frequency: 1.25kHz to 50MHz
- sampling frequency for Repetitive signals: 1GHz
spectrum analyzer:
- frequency range: 0...1.2kHz to 25MHz
- linear or logarithmic time scale
- operating principle: FFT (Fast Fourier Transform)
- FFT resolution: 2048 lines
- FFT input channel: CH1 or CH2
- zoom function
- markers for amplitude and frequency
transient recorder:
- time scale: 20ms/div to 2000s/div
- max. recording time: 9.4hours/screen
- automatic data storage
- automatic recording for more than 1 year
- max. number of samples: 100/s
- min. number of samples: 1 sample / 20s
- markers for time and amplitude
- recording and display of screens recording and display of screens

Specifications

general information:
- inputs: 2 channels, 1 external trigger input
- input impedance: 1Mohm // 30pF
- bandwidth: DC to 60 MHz ±3dB
- max. input voltage: 30V (AC + DC)
- input coupling: DC, AC and GND
- Supply from USB port (500mA)
minimum system requirements:
- IBM compatible PC
- needs Win98SE or higher
- SVGA display card (min. 800x600, 1024x768 recommended)
- mouse
- USB port 1.1 or 2.0 compatible
- CD Rom player
includes:
- USB PC oscilloscope
- 2 x 60MHz scope probe
- USB cable
- software on CD
- getting started manual
- translations on CD